Placing a Rain Barrel underneath a downspout is the method most people will use to collect and store the water coming from the rooftop, but how do you get the water to your garden? Certainly, a garden hose can be connected to your rain bucket and used to distribute water to your vegetables. However, a garden hose can be a hassle as it can constantly tangle and get caught up in other brush and yard obstacles. When you are done with the hose it must be wrapped and stored after each use.
A PVC water distribution system can be a simple alternative to the garden hose method still water to your new garden. Channeling the water through PVC is a much more permanent solution and provides a solid and steady way for you to water, where you need it most. Since PVC can sit above or below the ground, you can decide the best solution based on yourPreferences.
Step 1 Plan your route is not - PVC Water Plan your route so overwhelming as it may seem. All this must in this is to be built the best and most efficient route from point A, in your rain barrel to point B in your vegetable garden. Since your old math teacher used to say: "The shortest distance between two points is a straight line." Try the shortest line between points A and B define, if possible. This minimizes the amount of elbow and T-pieces needed to putYour PVC water system together.
Step 2: Once you define the best way to map out and measure the route you want your PVC take delivery system. Purchase the materials at your local garden or hardware store. Think of a few t-shirts and elbows, as sometimes your tube may need to be re-laid by a different route to purchase some of the obstacles in your garden.
Step 3 - Start building your delivery system by using the PVC tubing, tees and elbows together.Once it's all available to use to attach a garden hose to the top to test it. As the pressure from your rain barrel will not be high, it is advisable to keep the hose pressure is fairly low. When you reach the desired result, go back through and glue each piece together with PVC glue. Close the top of your rain barrel spigot and test the system from beginning to end.
In summary, a PVC water-delivery system can be a fairly simple task,design and develop. Once in place, your rain barrel to the main water source and feed your garden with the liquid refreshment, it is to hot, dry evenings need.
0 ความคิดเห็น:
แสดงความคิดเห็น