What is a blow bag? It is basically a heavy rubber bladder that attaches to a hose. It is used to clear a clogged drain. It is inserted into a clogged drain and uses water pressure pushed through. Blow bags are very successful in clearing clogs, which are completely blocked. They are effective in situations when the piston and snakes are not as sticky and greasy clogs. The bag is like a balloon. It fits into a drain pipe. Once the water turns on the Bags filled with water and pushes the clogs from pipes and into drains or septic tank. In fat clogged fail snakes, because the fat can clog up the snake without getting rid of the pass, the clog. Blow through the pockets explosion clogs with bursts of pressurized water.
Blow bags are available in various sizes to fit different pipes. Make sure the correct size of the drain you want to help you choose the jumps. Attach the bag to a garden hose and attach the> Hose to the water heater drain valve. The hot water is very effective in dissolving clogs. Put a drop bag in a toilet or sink drain, because the bag is not able to create enough friction to keep in place. It is better to place the bag directly into the drainpipe. You have to remove the P-trap under a sink, or remove the toilet. Not with violence in his pocket, because it can put curves in the pipes and the bag can. Once the bag isdeep in the city, turn on the water and turn the hose slowly clockwise while pulling the hose. Turn the hose clockwise to the bag off its hinges lift the hose so that you with a bigger problem.
If you want to blow the bag you need to switch to remove the water. Wait for the bag to air out and then gently filled the bag from the tap. If the bag is inserted, turning the bag a little clockwise. Bring the section of the tube, youpreviously removed, and you should have stopped a clear free drainage.
Water lines have pressure. A drainage system is not pressurized. The water flows by gravity alone. The drain can withstand pressure, but pressure remains only a burden, the weight of the outflow of water. If you are a print tool, like a punch bag, pressure on the drainage pipes. Because of this burst pipes. When stop all clearing, there is always a riskadditional repairs.
0 ความคิดเห็น:
แสดงความคิดเห็น